org.apache.commons.lang3.text
Class StrSubstitutor

java.lang.Object
  extended by org.apache.commons.lang3.text.StrSubstitutor

public class StrSubstitutor
extends Object

Substitutes variables within a string by values.

This class takes a piece of text and substitutes all the variables within it. The default definition of a variable is ${variableName}. The prefix and suffix can be changed via constructors and set methods.

Variable values are typically resolved from a map, but could also be resolved from system properties, or by supplying a custom variable resolver.

The simplest example is to use this class to replace Java System properties. For example:

 StrSubstitutor.replaceSystemProperties(
      "You are running with java.version = ${java.version} and os.name = ${os.name}.");
 

Typical usage of this class follows the following pattern: First an instance is created and initialized with the map that contains the values for the available variables. If a prefix and/or suffix for variables should be used other than the default ones, the appropriate settings can be performed. After that the replace() method can be called passing in the source text for interpolation. In the returned text all variable references (as long as their values are known) will be resolved. The following example demonstrates this:

 Map valuesMap = HashMap();
 valuesMap.put("animal", "quick brown fox");
 valuesMap.put("target", "lazy dog");
 String templateString = "The ${animal} jumped over the ${target}.";
 StrSubstitutor sub = new StrSubstitutor(valuesMap);
 String resolvedString = sub.replace(templateString);
 
yielding:
      The quick brown fox jumped over the lazy dog.
 

In addition to this usage pattern there are some static convenience methods that cover the most common use cases. These methods can be used without the need of manually creating an instance. However if multiple replace operations are to be performed, creating and reusing an instance of this class will be more efficient.

Variable replacement works in a recursive way. Thus, if a variable value contains a variable then that variable will also be replaced. Cyclic replacements are detected and will cause an exception to be thrown.

Sometimes the interpolation's result must contain a variable prefix. As an example take the following source text:

   The variable ${${name}} must be used.
 
Here only the variable's name referred to in the text should be replaced resulting in the text (assuming that the value of the name variable is x):
   The variable ${x} must be used.
 
To achieve this effect there are two possibilities: Either set a different prefix and suffix for variables which do not conflict with the result text you want to produce. The other possibility is to use the escape character, by default '$'. If this character is placed before a variable reference, this reference is ignored and won't be replaced. For example:
   The variable $${${name}} must be used.
 

In some complex scenarios you might even want to perform substitution in the names of variables, for instance

 ${jre-${java.specification.version}}
 
StrSubstitutor supports this recursive substitution in variable names, but it has to be enabled explicitly by setting the enableSubstitutionInVariables property to true.

Since:
2.2
Version:
$Id: StrSubstitutor.java 1088899 2011-04-05 05:31:27Z bayard $

Field Summary
static char DEFAULT_ESCAPE
          Constant for the default escape character.
static StrMatcher DEFAULT_PREFIX
          Constant for the default variable prefix.
static StrMatcher DEFAULT_SUFFIX
          Constant for the default variable suffix.
 
Constructor Summary
StrSubstitutor()
          Creates a new instance with defaults for variable prefix and suffix and the escaping character.
StrSubstitutor(Map<String,V> valueMap)
          Creates a new instance and initializes it.
StrSubstitutor(Map<String,V> valueMap, String prefix, String suffix)
          Creates a new instance and initializes it.
StrSubstitutor(Map<String,V> valueMap, String prefix, String suffix, char escape)
          Creates a new instance and initializes it.
StrSubstitutor(StrLookup<?> variableResolver)
          Creates a new instance and initializes it.
StrSubstitutor(StrLookup<?> variableResolver, String prefix, String suffix, char escape)
          Creates a new instance and initializes it.
StrSubstitutor(StrLookup<?> variableResolver, StrMatcher prefixMatcher, StrMatcher suffixMatcher, char escape)
          Creates a new instance and initializes it.
 
Method Summary
 char getEscapeChar()
          Returns the escape character.
 StrMatcher getVariablePrefixMatcher()
          Gets the variable prefix matcher currently in use.
 StrLookup<?> getVariableResolver()
          Gets the VariableResolver that is used to lookup variables.
 StrMatcher getVariableSuffixMatcher()
          Gets the variable suffix matcher currently in use.
 boolean isEnableSubstitutionInVariables()
          Returns a flag whether substitution is done in variable names.
 String replace(char[] source)
          Replaces all the occurrences of variables with their matching values from the resolver using the given source array as a template.
 String replace(char[] source, int offset, int length)
          Replaces all the occurrences of variables with their matching values from the resolver using the given source array as a template.
 String replace(Object source)
          Replaces all the occurrences of variables in the given source object with their matching values from the resolver.
static
<V> String
replace(Object source, Map<String,V> valueMap)
          Replaces all the occurrences of variables in the given source object with their matching values from the map.
static
<V> String
replace(Object source, Map<String,V> valueMap, String prefix, String suffix)
          Replaces all the occurrences of variables in the given source object with their matching values from the map.
static String replace(Object source, Properties valueProperties)
          Replaces all the occurrences of variables in the given source object with their matching values from the properties.
 String replace(StrBuilder source)
          Replaces all the occurrences of variables with their matching values from the resolver using the given source builder as a template.
 String replace(StrBuilder source, int offset, int length)
          Replaces all the occurrences of variables with their matching values from the resolver using the given source builder as a template.
 String replace(String source)
          Replaces all the occurrences of variables with their matching values from the resolver using the given source string as a template.
 String replace(StringBuffer source)
          Replaces all the occurrences of variables with their matching values from the resolver using the given source buffer as a template.
 String replace(StringBuffer source, int offset, int length)
          Replaces all the occurrences of variables with their matching values from the resolver using the given source buffer as a template.
 String replace(String source, int offset, int length)
          Replaces all the occurrences of variables with their matching values from the resolver using the given source string as a template.
 boolean replaceIn(StrBuilder source)
          Replaces all the occurrences of variables within the given source builder with their matching values from the resolver.
 boolean replaceIn(StrBuilder source, int offset, int length)
          Replaces all the occurrences of variables within the given source builder with their matching values from the resolver.
 boolean replaceIn(StringBuffer source)
          Replaces all the occurrences of variables within the given source buffer with their matching values from the resolver.
 boolean replaceIn(StringBuffer source, int offset, int length)
          Replaces all the occurrences of variables within the given source buffer with their matching values from the resolver.
static String replaceSystemProperties(Object source)
          Replaces all the occurrences of variables in the given source object with their matching values from the system properties.
protected  String resolveVariable(String variableName, StrBuilder buf, int startPos, int endPos)
          Internal method that resolves the value of a variable.
 void setEnableSubstitutionInVariables(boolean enableSubstitutionInVariables)
          Sets a flag whether substitution is done in variable names.
 void setEscapeChar(char escapeCharacter)
          Sets the escape character.
 StrSubstitutor setVariablePrefix(char prefix)
          Sets the variable prefix to use.
 StrSubstitutor setVariablePrefix(String prefix)
          Sets the variable prefix to use.
 StrSubstitutor setVariablePrefixMatcher(StrMatcher prefixMatcher)
          Sets the variable prefix matcher currently in use.
 void setVariableResolver(StrLookup<?> variableResolver)
          Sets the VariableResolver that is used to lookup variables.
 StrSubstitutor setVariableSuffix(char suffix)
          Sets the variable suffix to use.
 StrSubstitutor setVariableSuffix(String suffix)
          Sets the variable suffix to use.
 StrSubstitutor setVariableSuffixMatcher(StrMatcher suffixMatcher)
          Sets the variable suffix matcher currently in use.
protected  boolean substitute(StrBuilder buf, int offset, int length)
          Internal method that substitutes the variables.
 
Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
 

Field Detail

DEFAULT_ESCAPE

public static final char DEFAULT_ESCAPE
Constant for the default escape character.

See Also:
Constant Field Values

DEFAULT_PREFIX

public static final StrMatcher DEFAULT_PREFIX
Constant for the default variable prefix.


DEFAULT_SUFFIX

public static final StrMatcher DEFAULT_SUFFIX
Constant for the default variable suffix.

Constructor Detail

StrSubstitutor

public StrSubstitutor()
Creates a new instance with defaults for variable prefix and suffix and the escaping character.


StrSubstitutor

public StrSubstitutor(Map<String,V> valueMap)
Creates a new instance and initializes it. Uses defaults for variable prefix and suffix and the escaping character.

Type Parameters:
V - the type of the values in the map
Parameters:
valueMap - the map with the variables' values, may be null

StrSubstitutor

public StrSubstitutor(Map<String,V> valueMap,
                      String prefix,
                      String suffix)
Creates a new instance and initializes it. Uses a default escaping character.

Type Parameters:
V - the type of the values in the map
Parameters:
valueMap - the map with the variables' values, may be null
prefix - the prefix for variables, not null
suffix - the suffix for variables, not null
Throws:
IllegalArgumentException - if the prefix or suffix is null

StrSubstitutor

public StrSubstitutor(Map<String,V> valueMap,
                      String prefix,
                      String suffix,
                      char escape)
Creates a new instance and initializes it.

Type Parameters:
V - the type of the values in the map
Parameters:
valueMap - the map with the variables' values, may be null
prefix - the prefix for variables, not null
suffix - the suffix for variables, not null
escape - the escape character
Throws:
IllegalArgumentException - if the prefix or suffix is null

StrSubstitutor

public StrSubstitutor(StrLookup<?> variableResolver)
Creates a new instance and initializes it.

Parameters:
variableResolver - the variable resolver, may be null

StrSubstitutor

public StrSubstitutor(StrLookup<?> variableResolver,
                      String prefix,
                      String suffix,
                      char escape)
Creates a new instance and initializes it.

Parameters:
variableResolver - the variable resolver, may be null
prefix - the prefix for variables, not null
suffix - the suffix for variables, not null
escape - the escape character
Throws:
IllegalArgumentException - if the prefix or suffix is null

StrSubstitutor

public StrSubstitutor(StrLookup<?> variableResolver,
                      StrMatcher prefixMatcher,
                      StrMatcher suffixMatcher,
                      char escape)
Creates a new instance and initializes it.

Parameters:
variableResolver - the variable resolver, may be null
prefixMatcher - the prefix for variables, not null
suffixMatcher - the suffix for variables, not null
escape - the escape character
Throws:
IllegalArgumentException - if the prefix or suffix is null
Method Detail

replace

public static <V> String replace(Object source,
                                 Map<String,V> valueMap)
Replaces all the occurrences of variables in the given source object with their matching values from the map.

Type Parameters:
V - the type of the values in the map
Parameters:
source - the source text containing the variables to substitute, null returns null
valueMap - the map with the values, may be null
Returns:
the result of the replace operation

replace

public static <V> String replace(Object source,
                                 Map<String,V> valueMap,
                                 String prefix,
                                 String suffix)
Replaces all the occurrences of variables in the given source object with their matching values from the map. This method allows to specifiy a custom variable prefix and suffix

Type Parameters:
V - the type of the values in the map
Parameters:
source - the source text containing the variables to substitute, null returns null
valueMap - the map with the values, may be null
prefix - the prefix of variables, not null
suffix - the suffix of variables, not null
Returns:
the result of the replace operation
Throws:
IllegalArgumentException - if the prefix or suffix is null

replace

public static String replace(Object source,
                             Properties valueProperties)
Replaces all the occurrences of variables in the given source object with their matching values from the properties.

Parameters:
source - the source text containing the variables to substitute, null returns null
valueProperties - the properties with values, may be null
Returns:
the result of the replace operation

replaceSystemProperties

public static String replaceSystemProperties(Object source)
Replaces all the occurrences of variables in the given source object with their matching values from the system properties.

Parameters:
source - the source text containing the variables to substitute, null returns null
Returns:
the result of the replace operation

replace

public String replace(String source)
Replaces all the occurrences of variables with their matching values from the resolver using the given source string as a template.

Parameters:
source - the string to replace in, null returns null
Returns:
the result of the replace operation

replace

public String replace(String source,
                      int offset,
                      int length)
Replaces all the occurrences of variables with their matching values from the resolver using the given source string as a template.

Only the specified portion of the string will be processed. The rest of the string is not processed, and is not returned.

Parameters:
source - the string to replace in, null returns null
offset - the start offset within the array, must be valid
length - the length within the array to be processed, must be valid
Returns:
the result of the replace operation

replace

public String replace(char[] source)
Replaces all the occurrences of variables with their matching values from the resolver using the given source array as a template. The array is not altered by this method.

Parameters:
source - the character array to replace in, not altered, null returns null
Returns:
the result of the replace operation

replace

public String replace(char[] source,
                      int offset,
                      int length)
Replaces all the occurrences of variables with their matching values from the resolver using the given source array as a template. The array is not altered by this method.

Only the specified portion of the array will be processed. The rest of the array is not processed, and is not returned.

Parameters:
source - the character array to replace in, not altered, null returns null
offset - the start offset within the array, must be valid
length - the length within the array to be processed, must be valid
Returns:
the result of the replace operation

replace

public String replace(StringBuffer source)
Replaces all the occurrences of variables with their matching values from the resolver using the given source buffer as a template. The buffer is not altered by this method.

Parameters:
source - the buffer to use as a template, not changed, null returns null
Returns:
the result of the replace operation

replace

public String replace(StringBuffer source,
                      int offset,
                      int length)
Replaces all the occurrences of variables with their matching values from the resolver using the given source buffer as a template. The buffer is not altered by this method.

Only the specified portion of the buffer will be processed. The rest of the buffer is not processed, and is not returned.

Parameters:
source - the buffer to use as a template, not changed, null returns null
offset - the start offset within the array, must be valid
length - the length within the array to be processed, must be valid
Returns:
the result of the replace operation

replace

public String replace(StrBuilder source)
Replaces all the occurrences of variables with their matching values from the resolver using the given source builder as a template. The builder is not altered by this method.

Parameters:
source - the builder to use as a template, not changed, null returns null
Returns:
the result of the replace operation

replace

public String replace(StrBuilder source,
                      int offset,
                      int length)
Replaces all the occurrences of variables with their matching values from the resolver using the given source builder as a template. The builder is not altered by this method.

Only the specified portion of the builder will be processed. The rest of the builder is not processed, and is not returned.

Parameters:
source - the builder to use as a template, not changed, null returns null
offset - the start offset within the array, must be valid
length - the length within the array to be processed, must be valid
Returns:
the result of the replace operation

replace

public String replace(Object source)
Replaces all the occurrences of variables in the given source object with their matching values from the resolver. The input source object is converted to a string using toString and is not altered.

Parameters:
source - the source to replace in, null returns null
Returns:
the result of the replace operation

replaceIn

public boolean replaceIn(StringBuffer source)
Replaces all the occurrences of variables within the given source buffer with their matching values from the resolver. The buffer is updated with the result.

Parameters:
source - the buffer to replace in, updated, null returns zero
Returns:
true if altered

replaceIn

public boolean replaceIn(StringBuffer source,
                         int offset,
                         int length)
Replaces all the occurrences of variables within the given source buffer with their matching values from the resolver. The buffer is updated with the result.

Only the specified portion of the buffer will be processed. The rest of the buffer is not processed, but it is not deleted.

Parameters:
source - the buffer to replace in, updated, null returns zero
offset - the start offset within the array, must be valid
length - the length within the buffer to be processed, must be valid
Returns:
true if altered

replaceIn

public boolean replaceIn(StrBuilder source)
Replaces all the occurrences of variables within the given source builder with their matching values from the resolver.

Parameters:
source - the builder to replace in, updated, null returns zero
Returns:
true if altered

replaceIn

public boolean replaceIn(StrBuilder source,
                         int offset,
                         int length)
Replaces all the occurrences of variables within the given source builder with their matching values from the resolver.

Only the specified portion of the builder will be processed. The rest of the builder is not processed, but it is not deleted.

Parameters:
source - the builder to replace in, null returns zero
offset - the start offset within the array, must be valid
length - the length within the builder to be processed, must be valid
Returns:
true if altered

substitute

protected boolean substitute(StrBuilder buf,
                             int offset,
                             int length)
Internal method that substitutes the variables.

Most users of this class do not need to call this method. This method will be called automatically by another (public) method.

Writers of subclasses can override this method if they need access to the substitution process at the start or end.

Parameters:
buf - the string builder to substitute into, not null
offset - the start offset within the builder, must be valid
length - the length within the builder to be processed, must be valid
Returns:
true if altered

resolveVariable

protected String resolveVariable(String variableName,
                                 StrBuilder buf,
                                 int startPos,
                                 int endPos)
Internal method that resolves the value of a variable.

Most users of this class do not need to call this method. This method is called automatically by the substitution process.

Writers of subclasses can override this method if they need to alter how each substitution occurs. The method is passed the variable's name and must return the corresponding value. This implementation uses the getVariableResolver() with the variable's name as the key.

Parameters:
variableName - the name of the variable, not null
buf - the buffer where the substitution is occurring, not null
startPos - the start position of the variable including the prefix, valid
endPos - the end position of the variable including the suffix, valid
Returns:
the variable's value or null if the variable is unknown

getEscapeChar

public char getEscapeChar()
Returns the escape character.

Returns:
the character used for escaping variable references

setEscapeChar

public void setEscapeChar(char escapeCharacter)
Sets the escape character. If this character is placed before a variable reference in the source text, this variable will be ignored.

Parameters:
escapeCharacter - the escape character (0 for disabling escaping)

getVariablePrefixMatcher

public StrMatcher getVariablePrefixMatcher()
Gets the variable prefix matcher currently in use.

The variable prefix is the characer or characters that identify the start of a variable. This prefix is expressed in terms of a matcher allowing advanced prefix matches.

Returns:
the prefix matcher in use

setVariablePrefixMatcher

public StrSubstitutor setVariablePrefixMatcher(StrMatcher prefixMatcher)
Sets the variable prefix matcher currently in use.

The variable prefix is the characer or characters that identify the start of a variable. This prefix is expressed in terms of a matcher allowing advanced prefix matches.

Parameters:
prefixMatcher - the prefix matcher to use, null ignored
Returns:
this, to enable chaining
Throws:
IllegalArgumentException - if the prefix matcher is null

setVariablePrefix

public StrSubstitutor setVariablePrefix(char prefix)
Sets the variable prefix to use.

The variable prefix is the character or characters that identify the start of a variable. This method allows a single character prefix to be easily set.

Parameters:
prefix - the prefix character to use
Returns:
this, to enable chaining

setVariablePrefix

public StrSubstitutor setVariablePrefix(String prefix)
Sets the variable prefix to use.

The variable prefix is the characer or characters that identify the start of a variable. This method allows a string prefix to be easily set.

Parameters:
prefix - the prefix for variables, not null
Returns:
this, to enable chaining
Throws:
IllegalArgumentException - if the prefix is null

getVariableSuffixMatcher

public StrMatcher getVariableSuffixMatcher()
Gets the variable suffix matcher currently in use.

The variable suffix is the characer or characters that identify the end of a variable. This suffix is expressed in terms of a matcher allowing advanced suffix matches.

Returns:
the suffix matcher in use

setVariableSuffixMatcher

public StrSubstitutor setVariableSuffixMatcher(StrMatcher suffixMatcher)
Sets the variable suffix matcher currently in use.

The variable suffix is the characer or characters that identify the end of a variable. This suffix is expressed in terms of a matcher allowing advanced suffix matches.

Parameters:
suffixMatcher - the suffix matcher to use, null ignored
Returns:
this, to enable chaining
Throws:
IllegalArgumentException - if the suffix matcher is null

setVariableSuffix

public StrSubstitutor setVariableSuffix(char suffix)
Sets the variable suffix to use.

The variable suffix is the characer or characters that identify the end of a variable. This method allows a single character suffix to be easily set.

Parameters:
suffix - the suffix character to use
Returns:
this, to enable chaining

setVariableSuffix

public StrSubstitutor setVariableSuffix(String suffix)
Sets the variable suffix to use.

The variable suffix is the character or characters that identify the end of a variable. This method allows a string suffix to be easily set.

Parameters:
suffix - the suffix for variables, not null
Returns:
this, to enable chaining
Throws:
IllegalArgumentException - if the suffix is null

getVariableResolver

public StrLookup<?> getVariableResolver()
Gets the VariableResolver that is used to lookup variables.

Returns:
the VariableResolver

setVariableResolver

public void setVariableResolver(StrLookup<?> variableResolver)
Sets the VariableResolver that is used to lookup variables.

Parameters:
variableResolver - the VariableResolver

isEnableSubstitutionInVariables

public boolean isEnableSubstitutionInVariables()
Returns a flag whether substitution is done in variable names.

Returns:
the substitution in variable names flag
Since:
3.0

setEnableSubstitutionInVariables

public void setEnableSubstitutionInVariables(boolean enableSubstitutionInVariables)
Sets a flag whether substitution is done in variable names. If set to true, the names of variables can contain other variables which are processed first before the original variable is evaluated, e.g. ${jre-${java.version}}. The default value is false.

Parameters:
enableSubstitutionInVariables - the new value of the flag
Since:
3.0


Copyright © 2001-2011 The Apache Software Foundation. All Rights Reserved.