org.apache.commons.net.ftp
Class FTP

java.lang.Object
  extended by org.apache.commons.net.SocketClient
      extended by org.apache.commons.net.telnet.TelnetClient
          extended by org.apache.commons.net.ftp.FTP
Direct Known Subclasses:
FTPClient

public class FTP
extends TelnetClient

FTP provides the basic the functionality necessary to implement your own FTP client. It extends org.apache.commons.net.TelnetClient simply because it saves the writing of extra code to handle the FTP control connection which always remains open during an FTP session and uses the Telnet protocol. Aggregation would require writing new wrapper methods and wouldn't leverage the functionality already present in org.apache.commons.net.SocketClient.

To derive the full benefits of the FTP class requires some knowledge of the FTP protocol defined in RFC 959. However, there is no reason why you should have to use the FTP class. The FTPClient class, derived from FTP, implements all the functionality required of an FTP client. The FTP class is made public to provide access to various FTP constants and to make it easier for adventurous programmers (or those with special needs) to interact with the FTP protocol and implement their own clients. A set of methods with names corresponding to the FTP command names are provided to facilitate this interaction.

You should keep in mind that the FTP server may choose to prematurely close a connection if the client has been idle for longer than a given time period (usually 900 seconds). The FTP class will detect a premature FTP server connection closing when it receives a FTPReply.SERVICE_NOT_AVAILABLE response to a command. When that occurs, the FTP class method encountering that reply will throw an FTPConnectionClosedException . FTPConectionClosedException is a subclass of IOException and therefore need not be caught separately, but if you are going to catch it separately, its catch block must appear before the more general IOException catch block. When you encounter an FTPConnectionClosedException , you must disconnect the connection with disconnect() to properly clean up the system resources used by FTP. Before disconnecting, you may check the last reply code and text with getReplyCode , getReplyString , and getReplyStrings. You may avoid server disconnections while the client is idle by periodicaly sending NOOP commands to the server.

Rather than list it separately for each method, we mention here that every method communicating with the server and throwing an IOException can also throw a MalformedServerReplyException , which is a subclass of IOException. A MalformedServerReplyException will be thrown when the reply received from the server deviates enough from the protocol specification that it cannot be interpreted in a useful manner despite attempts to be as lenient as possible.

Author:
Daniel F. Savarese
See Also:
FTPClient, FTPConnectionClosedException, MalformedServerReplyException

Field Summary
protected  ProtocolCommandSupport _commandSupport_
          A ProtocolCommandSupport object used to manage the registering of ProtocolCommandListeners and te firing of ProtocolCommandEvents.
static int ASCII_FILE_TYPE
          A constant used to indicate the file(s) being transfered should be treated as ASCII.
static int BINARY_FILE_TYPE
          A constant used to indicate the file(s) being transfered should be treated as a binary image, i.e., no translations should be performed.
static int BLOCK_TRANSFER_MODE
          A constant used to indicate a file is to be transfered as a series of blocks.
static int CARRIAGE_CONTROL_TEXT_FORMAT
          A constant used to indicate a text file contains ASA vertical format control characters.
static int COMPRESSED_TRANSFER_MODE
          A constant used to indicate a file is to be transfered as FTP compressed data.
static String DEFAULT_CONTROL_ENCODING
          The default character encoding used for communicating over an FTP control connection.
static int DEFAULT_DATA_PORT
          The default FTP data port (20).
static int DEFAULT_PORT
          The default FTP control port (21).
static int EBCDIC_FILE_TYPE
          A constant used to indicate the file(s) being transfered should be treated as EBCDIC.
static int FILE_STRUCTURE
          A constant used to indicate a file is to be treated as a continuous sequence of bytes.
static int IMAGE_FILE_TYPE
          A constant used to indicate the file(s) being transfered should be treated as a binary image, i.e., no translations should be performed.
static int LOCAL_FILE_TYPE
          A constant used to indicate the file(s) being transfered should be treated as a local type.
static int NON_PRINT_TEXT_FORMAT
          A constant used for text files to indicate a non-print text format.
static int PAGE_STRUCTURE
          A constant used to indicate a file is to be treated as a set of independent indexed pages.
static int RECORD_STRUCTURE
          A constant used to indicate a file is to be treated as a sequence of records.
static int STREAM_TRANSFER_MODE
          A constant used to indicate a file is to be transfered as a stream of bytes.
static int TELNET_TEXT_FORMAT
          A constant used to indicate a text file contains format vertical format control characters.
protected static int TERMINAL_TYPE
          Terminal type option
protected static int TERMINAL_TYPE_IS
          Is (for subnegotiation)
protected static int TERMINAL_TYPE_SEND
          Send (for subnegotiation)
 
Fields inherited from class org.apache.commons.net.telnet.TelnetClient
readerThread
 
Fields inherited from class org.apache.commons.net.SocketClient
_defaultPort_, _input_, _isConnected_, _output_, _socket_, _socketFactory_, _timeout_, NETASCII_EOL
 
Constructor Summary
FTP()
          The default FTP constructor.
 
Method Summary
protected  void _connectAction_()
          Handles special connection requirements.
 int abor()
          A convenience method to send the FTP ABOR command to the server, receive the reply, and return the reply code.
 int acct(String account)
          A convenience method to send the FTP ACCT command to the server, receive the reply, and return the reply code.
 void addProtocolCommandListener(ProtocolCommandListener listener)
          Adds a ProtocolCommandListener.
 int allo(int bytes)
          A convenience method to send the FTP ALLO command to the server, receive the reply, and return the reply code.
 int allo(int bytes, int recordSize)
          A convenience method to send the FTP ALLO command to the server, receive the reply, and return the reply code.
 int appe(String pathname)
          A convenience method to send the FTP APPE command to the server, receive the reply, and return the reply code.
 int cdup()
          A convenience method to send the FTP CDUP command to the server, receive the reply, and return the reply code.
 int cwd(String directory)
          A convenience method to send the FTP CWD command to the server, receive the reply, and return the reply code.
 int dele(String pathname)
          A convenience method to send the FTP DELE command to the server, receive the reply, and return the reply code.
 void disconnect()
          Closes the control connection to the FTP server and sets to null some internal data so that the memory may be reclaimed by the garbage collector.
 String getControlEncoding()
           
 int getReply()
          Fetches a reply from the FTP server and returns the integer reply code.
 int getReplyCode()
          Returns the integer value of the reply code of the last FTP reply.
 String getReplyString()
          Returns the entire text of the last FTP server response exactly as it was received, including all end of line markers in NETASCII format.
 String[] getReplyStrings()
          Returns the lines of text from the last FTP server response as an array of strings, one entry per line.
 int help()
          A convenience method to send the FTP HELP command to the server, receive the reply, and return the reply code.
 int help(String command)
          A convenience method to send the FTP HELP command to the server, receive the reply, and return the reply code.
 int list()
          A convenience method to send the FTP LIST command to the server, receive the reply, and return the reply code.
 int list(String pathname)
          A convenience method to send the FTP LIST command to the server, receive the reply, and return the reply code.
 int mkd(String pathname)
          A convenience method to send the FTP MKD command to the server, receive the reply, and return the reply code.
 int mode(int mode)
          A convenience method to send the FTP MODE command to the server, receive the reply, and return the reply code.
 int nlst()
          A convenience method to send the FTP NLST command to the server, receive the reply, and return the reply code.
 int nlst(String pathname)
          A convenience method to send the FTP NLST command to the server, receive the reply, and return the reply code.
 int noop()
          A convenience method to send the FTP NOOP command to the server, receive the reply, and return the reply code.
 int pass(String password)
          A convenience method to send the FTP PASS command to the server, receive the reply, and return the reply code.
 int pasv()
          A convenience method to send the FTP PASV command to the server, receive the reply, and return the reply code.
 int port(InetAddress host, int port)
          A convenience method to send the FTP PORT command to the server, receive the reply, and return the reply code.
 int pwd()
          A convenience method to send the FTP PWD command to the server, receive the reply, and return the reply code.
 int quit()
          A convenience method to send the FTP QUIT command to the server, receive the reply, and return the reply code.
 int rein()
          A convenience method to send the FTP REIN command to the server, receive the reply, and return the reply code.
 void removeProtocolCommandListener(ProtocolCommandListener listener)
          Removes a ProtocolCommandListener.
 int rest(String marker)
          A convenience method to send the FTP REST command to the server, receive the reply, and return the reply code.
 int retr(String pathname)
          A convenience method to send the FTP RETR command to the server, receive the reply, and return the reply code.
 int rmd(String pathname)
          A convenience method to send the FTP RMD command to the server, receive the reply, and return the reply code.
 int rnfr(String pathname)
          A convenience method to send the FTP RNFR command to the server, receive the reply, and return the reply code.
 int rnto(String pathname)
          A convenience method to send the FTP RNTO command to the server, receive the reply, and return the reply code.
 int sendCommand(int command)
          Sends an FTP command with no arguments to the server, waits for a reply and returns the numerical response code.
 int sendCommand(int command, String args)
          Sends an FTP command to the server, waits for a reply and returns the numerical response code.
 int sendCommand(String command)
          Sends an FTP command with no arguments to the server, waits for a reply and returns the numerical response code.
 int sendCommand(String command, String args)
          Sends an FTP command to the server, waits for a reply and returns the numerical response code.
 void setControlEncoding(String encoding)
          Sets the character encoding used by the FTP control connection.
 int site(String parameters)
          A convenience method to send the FTP SITE command to the server, receive the reply, and return the reply code.
 int smnt(String dir)
          A convenience method to send the FTP SMNT command to the server, receive the reply, and return the reply code.
 int stat()
          A convenience method to send the FTP STAT command to the server, receive the reply, and return the reply code.
 int stat(String pathname)
          A convenience method to send the FTP STAT command to the server, receive the reply, and return the reply code.
 int stor(String pathname)
          A convenience method to send the FTP STOR command to the server, receive the reply, and return the reply code.
 int stou()
          A convenience method to send the FTP STOU command to the server, receive the reply, and return the reply code.
 int stou(String pathname)
          A convenience method to send the FTP STOU command to the server, receive the reply, and return the reply code.
 int stru(int structure)
          A convenience method to send the FTP STRU command to the server, receive the reply, and return the reply code.
 int syst()
          A convenience method to send the FTP SYST command to the server, receive the reply, and return the reply code.
 int type(int fileType)
          A convenience method to send the FTP TYPE command to the server, receive the reply, and return the reply code.
 int type(int fileType, int formatOrByteSize)
          A convenience method to send the FTP TYPE command for text files to the server, receive the reply, and return the reply code.
 int user(String username)
          A convenience method to send the FTP USER command to the server, receive the reply, and return the reply code.
 
Methods inherited from class org.apache.commons.net.telnet.TelnetClient
addOptionHandler, deleteOptionHandler, getInputStream, getLocalOptionState, getOutputStream, getReaderThread, getRemoteOptionState, registerNotifHandler, registerSpyStream, sendAYT, setReaderThread, stopSpyStream, unregisterNotifHandler
 
Methods inherited from class org.apache.commons.net.SocketClient
connect, connect, connect, connect, connect, connect, getDefaultPort, getDefaultTimeout, getLocalAddress, getLocalPort, getRemoteAddress, getRemotePort, getSoLinger, getSoTimeout, getTcpNoDelay, isConnected, setDefaultPort, setDefaultTimeout, setSocketFactory, setSoLinger, setSoTimeout, setTcpNoDelay, verifyRemote
 
Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
 

Field Detail

DEFAULT_DATA_PORT

public static final int DEFAULT_DATA_PORT
The default FTP data port (20).

See Also:
Constant Field Values

DEFAULT_PORT

public static final int DEFAULT_PORT
The default FTP control port (21).

See Also:
Constant Field Values

ASCII_FILE_TYPE

public static final int ASCII_FILE_TYPE
A constant used to indicate the file(s) being transfered should be treated as ASCII. This is the default file type. All constants ending in FILE_TYPE are used to indicate file types.

See Also:
Constant Field Values

EBCDIC_FILE_TYPE

public static final int EBCDIC_FILE_TYPE
A constant used to indicate the file(s) being transfered should be treated as EBCDIC. Note however that there are several different EBCDIC formats. All constants ending in FILE_TYPE are used to indicate file types.

See Also:
Constant Field Values

IMAGE_FILE_TYPE

public static final int IMAGE_FILE_TYPE
A constant used to indicate the file(s) being transfered should be treated as a binary image, i.e., no translations should be performed. All constants ending in FILE_TYPE are used to indicate file types.

See Also:
Constant Field Values

BINARY_FILE_TYPE

public static final int BINARY_FILE_TYPE
A constant used to indicate the file(s) being transfered should be treated as a binary image, i.e., no translations should be performed. All constants ending in FILE_TYPE are used to indicate file types.

See Also:
Constant Field Values

LOCAL_FILE_TYPE

public static final int LOCAL_FILE_TYPE
A constant used to indicate the file(s) being transfered should be treated as a local type. All constants ending in FILE_TYPE are used to indicate file types.

See Also:
Constant Field Values

NON_PRINT_TEXT_FORMAT

public static final int NON_PRINT_TEXT_FORMAT
A constant used for text files to indicate a non-print text format. This is the default format. All constants ending in TEXT_FORMAT are used to indicate text formatting for text transfers (both ASCII and EBCDIC).

See Also:
Constant Field Values

TELNET_TEXT_FORMAT

public static final int TELNET_TEXT_FORMAT
A constant used to indicate a text file contains format vertical format control characters. All constants ending in TEXT_FORMAT are used to indicate text formatting for text transfers (both ASCII and EBCDIC).

See Also:
Constant Field Values

CARRIAGE_CONTROL_TEXT_FORMAT

public static final int CARRIAGE_CONTROL_TEXT_FORMAT
A constant used to indicate a text file contains ASA vertical format control characters. All constants ending in TEXT_FORMAT are used to indicate text formatting for text transfers (both ASCII and EBCDIC).

See Also:
Constant Field Values

FILE_STRUCTURE

public static final int FILE_STRUCTURE
A constant used to indicate a file is to be treated as a continuous sequence of bytes. This is the default structure. All constants ending in _STRUCTURE are used to indicate file structure for file transfers.

See Also:
Constant Field Values

RECORD_STRUCTURE

public static final int RECORD_STRUCTURE
A constant used to indicate a file is to be treated as a sequence of records. All constants ending in _STRUCTURE are used to indicate file structure for file transfers.

See Also:
Constant Field Values

PAGE_STRUCTURE

public static final int PAGE_STRUCTURE
A constant used to indicate a file is to be treated as a set of independent indexed pages. All constants ending in _STRUCTURE are used to indicate file structure for file transfers.

See Also:
Constant Field Values

STREAM_TRANSFER_MODE

public static final int STREAM_TRANSFER_MODE
A constant used to indicate a file is to be transfered as a stream of bytes. This is the default transfer mode. All constants ending in TRANSFER_MODE are used to indicate file transfer modes.

See Also:
Constant Field Values

BLOCK_TRANSFER_MODE

public static final int BLOCK_TRANSFER_MODE
A constant used to indicate a file is to be transfered as a series of blocks. All constants ending in TRANSFER_MODE are used to indicate file transfer modes.

See Also:
Constant Field Values

COMPRESSED_TRANSFER_MODE

public static final int COMPRESSED_TRANSFER_MODE
A constant used to indicate a file is to be transfered as FTP compressed data. All constants ending in TRANSFER_MODE are used to indicate file transfer modes.

See Also:
Constant Field Values

DEFAULT_CONTROL_ENCODING

public static final String DEFAULT_CONTROL_ENCODING
The default character encoding used for communicating over an FTP control connection. The default encoding is an ASCII-compatible encoding. Some FTP servers expect other encodings. You can change the encoding used by an FTP instance with setControlEncoding.

See Also:
Constant Field Values

_commandSupport_

protected ProtocolCommandSupport _commandSupport_
A ProtocolCommandSupport object used to manage the registering of ProtocolCommandListeners and te firing of ProtocolCommandEvents.


TERMINAL_TYPE

protected static final int TERMINAL_TYPE
Terminal type option

See Also:
Constant Field Values

TERMINAL_TYPE_SEND

protected static final int TERMINAL_TYPE_SEND
Send (for subnegotiation)

See Also:
Constant Field Values

TERMINAL_TYPE_IS

protected static final int TERMINAL_TYPE_IS
Is (for subnegotiation)

See Also:
Constant Field Values
Constructor Detail

FTP

public FTP()
The default FTP constructor. Sets the default port to DEFAULT_PORT and initializes internal data structures for saving FTP reply information.

Method Detail

_connectAction_

protected void _connectAction_()
                        throws IOException
Description copied from class: TelnetClient
Handles special connection requirements.

Overrides:
_connectAction_ in class TelnetClient
Throws:
IOException - If an error occurs during connection setup.

setControlEncoding

public void setControlEncoding(String encoding)
Sets the character encoding used by the FTP control connection. Some FTP servers require that commands be issued in a non-ASCII encoding like UTF-8 so that filenames with multi-byte character representations (e.g, Big 8) can be specified.

Parameters:
encoding - The new character encoding for the control connection.

getControlEncoding

public String getControlEncoding()
Returns:
The character encoding used to communicate over the control connection.

addProtocolCommandListener

public void addProtocolCommandListener(ProtocolCommandListener listener)
Adds a ProtocolCommandListener. Delegates this task to _commandSupport_ .

Parameters:
listener - The ProtocolCommandListener to add.

removeProtocolCommandListener

public void removeProtocolCommandListener(ProtocolCommandListener listener)
Removes a ProtocolCommandListener. Delegates this task to _commandSupport_ .

Parameters:
listener - The ProtocolCommandListener to remove.

disconnect

public void disconnect()
                throws IOException
Closes the control connection to the FTP server and sets to null some internal data so that the memory may be reclaimed by the garbage collector. The reply text and code information from the last command is voided so that the memory it used may be reclaimed.

Overrides:
disconnect in class TelnetClient
Throws:
IOException - If an error occurs while disconnecting.

sendCommand

public int sendCommand(String command,
                       String args)
                throws IOException
Sends an FTP command to the server, waits for a reply and returns the numerical response code. After invocation, for more detailed information, the actual reply text can be accessed by calling getReplyString or getReplyStrings .

Parameters:
command - The text representation of the FTP command to send.
args - The arguments to the FTP command. If this parameter is set to null, then the command is sent with no argument.
Returns:
The integer value of the FTP reply code returned by the server in response to the command.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

sendCommand

public int sendCommand(int command,
                       String args)
                throws IOException
Sends an FTP command to the server, waits for a reply and returns the numerical response code. After invocation, for more detailed information, the actual reply text can be accessed by calling getReplyString or getReplyStrings .

Parameters:
command - The FTPCommand constant corresponding to the FTP command to send.
args - The arguments to the FTP command. If this parameter is set to null, then the command is sent with no argument.
Returns:
The integer value of the FTP reply code returned by the server in response to the command.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

sendCommand

public int sendCommand(String command)
                throws IOException
Sends an FTP command with no arguments to the server, waits for a reply and returns the numerical response code. After invocation, for more detailed information, the actual reply text can be accessed by calling getReplyString or getReplyStrings .

Parameters:
command - The text representation of the FTP command to send.
Returns:
The integer value of the FTP reply code returned by the server in response to the command.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

sendCommand

public int sendCommand(int command)
                throws IOException
Sends an FTP command with no arguments to the server, waits for a reply and returns the numerical response code. After invocation, for more detailed information, the actual reply text can be accessed by calling getReplyString or getReplyStrings .

Parameters:
command - The FTPCommand constant corresponding to the FTP command to send.
Returns:
The integer value of the FTP reply code returned by the server in response to the command.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

getReplyCode

public int getReplyCode()
Returns the integer value of the reply code of the last FTP reply. You will usually only use this method after you connect to the FTP server to check that the connection was successful since connect is of type void.

Returns:
The integer value of the reply code of the last FTP reply.

getReply

public int getReply()
             throws IOException
Fetches a reply from the FTP server and returns the integer reply code. After calling this method, the actual reply text can be accessed from either calling getReplyString or getReplyStrings . Only use this method if you are implementing your own FTP client or if you need to fetch a secondary response from the FTP server.

Returns:
The integer value of the reply code of the fetched FTP reply.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while receiving the server reply.

getReplyStrings

public String[] getReplyStrings()
Returns the lines of text from the last FTP server response as an array of strings, one entry per line. The end of line markers of each are stripped from each line.

Returns:
The lines of text from the last FTP response as an array.

getReplyString

public String getReplyString()
Returns the entire text of the last FTP server response exactly as it was received, including all end of line markers in NETASCII format.

Returns:
The entire text from the last FTP response as a String.

user

public int user(String username)
         throws IOException
A convenience method to send the FTP USER command to the server, receive the reply, and return the reply code.

Parameters:
username - The username to login under.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

pass

public int pass(String password)
         throws IOException
A convenience method to send the FTP PASS command to the server, receive the reply, and return the reply code.

Parameters:
password - The plain text password of the username being logged into.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

acct

public int acct(String account)
         throws IOException
A convenience method to send the FTP ACCT command to the server, receive the reply, and return the reply code.

Parameters:
account - The account name to access.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

abor

public int abor()
         throws IOException
A convenience method to send the FTP ABOR command to the server, receive the reply, and return the reply code.

Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

cwd

public int cwd(String directory)
        throws IOException
A convenience method to send the FTP CWD command to the server, receive the reply, and return the reply code.

Parameters:
directory - The new working directory.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

cdup

public int cdup()
         throws IOException
A convenience method to send the FTP CDUP command to the server, receive the reply, and return the reply code.

Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

quit

public int quit()
         throws IOException
A convenience method to send the FTP QUIT command to the server, receive the reply, and return the reply code.

Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

rein

public int rein()
         throws IOException
A convenience method to send the FTP REIN command to the server, receive the reply, and return the reply code.

Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

smnt

public int smnt(String dir)
         throws IOException
A convenience method to send the FTP SMNT command to the server, receive the reply, and return the reply code.

Parameters:
dir - The directory name.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

port

public int port(InetAddress host,
                int port)
         throws IOException
A convenience method to send the FTP PORT command to the server, receive the reply, and return the reply code.

Parameters:
host - The host owning the port.
port - The new port.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

pasv

public int pasv()
         throws IOException
A convenience method to send the FTP PASV command to the server, receive the reply, and return the reply code. Remember, it's up to you to interpret the reply string containing the host/port information.

Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

type

public int type(int fileType,
                int formatOrByteSize)
         throws IOException
A convenience method to send the FTP TYPE command for text files to the server, receive the reply, and return the reply code.

Parameters:
fileType - The type of the file (one of the FILE_TYPE constants).
formatOrByteSize - The format of the file (one of the _FORMAT constants. In the case of LOCAL_FILE_TYPE, the byte size.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

type

public int type(int fileType)
         throws IOException
A convenience method to send the FTP TYPE command to the server, receive the reply, and return the reply code.

Parameters:
fileType - The type of the file (one of the FILE_TYPE constants).
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

stru

public int stru(int structure)
         throws IOException
A convenience method to send the FTP STRU command to the server, receive the reply, and return the reply code.

Parameters:
structure - The structure of the file (one of the _STRUCTURE constants).
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

mode

public int mode(int mode)
         throws IOException
A convenience method to send the FTP MODE command to the server, receive the reply, and return the reply code.

Parameters:
mode - The transfer mode to use (one of the TRANSFER_MODE constants).
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

retr

public int retr(String pathname)
         throws IOException
A convenience method to send the FTP RETR command to the server, receive the reply, and return the reply code. Remember, it is up to you to manage the data connection. If you don't need this low level of access, use FTPClient , which will handle all low level details for you.

Parameters:
pathname - The pathname of the file to retrieve.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

stor

public int stor(String pathname)
         throws IOException
A convenience method to send the FTP STOR command to the server, receive the reply, and return the reply code. Remember, it is up to you to manage the data connection. If you don't need this low level of access, use FTPClient , which will handle all low level details for you.

Parameters:
pathname - The pathname to use for the file when stored at the remote end of the transfer.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

stou

public int stou()
         throws IOException
A convenience method to send the FTP STOU command to the server, receive the reply, and return the reply code. Remember, it is up to you to manage the data connection. If you don't need this low level of access, use FTPClient , which will handle all low level details for you.

Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

stou

public int stou(String pathname)
         throws IOException
A convenience method to send the FTP STOU command to the server, receive the reply, and return the reply code. Remember, it is up to you to manage the data connection. If you don't need this low level of access, use FTPClient , which will handle all low level details for you.

Parameters:
pathname - The base pathname to use for the file when stored at the remote end of the transfer. Some FTP servers require this.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

appe

public int appe(String pathname)
         throws IOException
A convenience method to send the FTP APPE command to the server, receive the reply, and return the reply code. Remember, it is up to you to manage the data connection. If you don't need this low level of access, use FTPClient , which will handle all low level details for you.

Parameters:
pathname - The pathname to use for the file when stored at the remote end of the transfer.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

allo

public int allo(int bytes)
         throws IOException
A convenience method to send the FTP ALLO command to the server, receive the reply, and return the reply code.

Parameters:
bytes - The number of bytes to allocate.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

allo

public int allo(int bytes,
                int recordSize)
         throws IOException
A convenience method to send the FTP ALLO command to the server, receive the reply, and return the reply code.

Parameters:
bytes - The number of bytes to allocate.
recordSize - The size of a record.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

rest

public int rest(String marker)
         throws IOException
A convenience method to send the FTP REST command to the server, receive the reply, and return the reply code.

Parameters:
marker - The marker at which to restart a transfer.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

rnfr

public int rnfr(String pathname)
         throws IOException
A convenience method to send the FTP RNFR command to the server, receive the reply, and return the reply code.

Parameters:
pathname - The pathname to rename from.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

rnto

public int rnto(String pathname)
         throws IOException
A convenience method to send the FTP RNTO command to the server, receive the reply, and return the reply code.

Parameters:
pathname - The pathname to rename to
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

dele

public int dele(String pathname)
         throws IOException
A convenience method to send the FTP DELE command to the server, receive the reply, and return the reply code.

Parameters:
pathname - The pathname to delete.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

rmd

public int rmd(String pathname)
        throws IOException
A convenience method to send the FTP RMD command to the server, receive the reply, and return the reply code.

Parameters:
pathname - The pathname of the directory to remove.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

mkd

public int mkd(String pathname)
        throws IOException
A convenience method to send the FTP MKD command to the server, receive the reply, and return the reply code.

Parameters:
pathname - The pathname of the new directory to create.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

pwd

public int pwd()
        throws IOException
A convenience method to send the FTP PWD command to the server, receive the reply, and return the reply code.

Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

list

public int list()
         throws IOException
A convenience method to send the FTP LIST command to the server, receive the reply, and return the reply code. Remember, it is up to you to manage the data connection. If you don't need this low level of access, use FTPClient , which will handle all low level details for you.

Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

list

public int list(String pathname)
         throws IOException
A convenience method to send the FTP LIST command to the server, receive the reply, and return the reply code. Remember, it is up to you to manage the data connection. If you don't need this low level of access, use FTPClient , which will handle all low level details for you.

Parameters:
pathname - The pathname to list.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

nlst

public int nlst()
         throws IOException
A convenience method to send the FTP NLST command to the server, receive the reply, and return the reply code. Remember, it is up to you to manage the data connection. If you don't need this low level of access, use FTPClient , which will handle all low level details for you.

Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

nlst

public int nlst(String pathname)
         throws IOException
A convenience method to send the FTP NLST command to the server, receive the reply, and return the reply code. Remember, it is up to you to manage the data connection. If you don't need this low level of access, use FTPClient , which will handle all low level details for you.

Parameters:
pathname - The pathname to list.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

site

public int site(String parameters)
         throws IOException
A convenience method to send the FTP SITE command to the server, receive the reply, and return the reply code.

Parameters:
parameters - The site parameters to send.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

syst

public int syst()
         throws IOException
A convenience method to send the FTP SYST command to the server, receive the reply, and return the reply code.

Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

stat

public int stat()
         throws IOException
A convenience method to send the FTP STAT command to the server, receive the reply, and return the reply code.

Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

stat

public int stat(String pathname)
         throws IOException
A convenience method to send the FTP STAT command to the server, receive the reply, and return the reply code.

Parameters:
pathname - A pathname to list.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

help

public int help()
         throws IOException
A convenience method to send the FTP HELP command to the server, receive the reply, and return the reply code.

Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

help

public int help(String command)
         throws IOException
A convenience method to send the FTP HELP command to the server, receive the reply, and return the reply code.

Parameters:
command - The command name on which to request help.
Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.

noop

public int noop()
         throws IOException
A convenience method to send the FTP NOOP command to the server, receive the reply, and return the reply code.

Returns:
The reply code received from the server.
Throws:
FTPConnectionClosedException - If the FTP server prematurely closes the connection as a result of the client being idle or some other reason causing the server to send FTP reply code 421. This exception may be caught either as an IOException or independently as itself.
IOException - If an I/O error occurs while either sending the command or receiving the server reply.


Copyright © 1997-2010 The Apache Software Foundation. All Rights Reserved.